This week, we continue our review of the white paper “How to Size a Worm Gear Screw Jack” by looking at the role Tonnage under load can affect the sizing of the linear motion system.
The load capacity of a jack is also limited by the physical constraints of its components, such as its drive sleeve, lift shaft or bearings. All anticipated loads should be within the rated capacity of the jack. Loads on the jack in most applications include: static loads, dynamic (or moving) loads, cutting forces or other reaction forces and acceleration/deceleration loads.
For shock loads, the peak load must not exceed the rated capacity of the jack, and an appropriate design factor should be applied that is commensurate with the severity of the shock.
For accidental overloads not anticipated in the design of the system, jacks produced by Nook Industries can sustain the following overload conditions without damage: 10 percent for dynamic loads, 30 percent for static loads.
The following is taken from an excellent white paper from Ron Givannone, Director of Application Engineering and Business Operations at Nook Industries (hyperlink). Titled “How to Size a Worm Gear Jack,” it looks at the key factors in figuring out what size and configuration of jack will work based on the needs of your application. Over the next few weeks, we’ll look at the different factors, and offer a bit more background.
This week, how Horsepower limitations can affect jack sizing.
When determining the lifting power of a jack, it’s a common mistake to assume the lifting capabilities of a jack are determined solely by its tonnage size. The load’s capacity is more often determined by its horsepower limitations. For example, a 10-ton jack may only be able to lift a one-ton load, because it is temperature-limited by the working horsepower it requires to lift the load.
The horsepower limit of the jack is a result of its ability to dissipate the heat generated from the inefficiencies of its components. The maximum horsepower value represents the point at which the heat that is generated by the working horsepower to move a given load meets the maximum temperature of the internal components. The working horsepower to move a given load is calculated by using the following formula:
How well a jack can dissipate heat is influenced by many application-specific variables, including mounting, environment, duty cycle and lubrication. The best way to determine whether performance is within horsepower limits is to measure the jack temperature. The temperature of the housing near the worm gear must not exceed 200 degrees Fahrenheit.
Looking for help in figuring out the right horsepower? Here are some tools:
Increase in customer demand within the packaging industry continues to power the need for the most reliable linear motion products to be integrated into packaging applications. Tailored to solve the toughest packaging challenges, Nook’s products are found in a variety of different packaging applications from filling and measuring to wrapping and labeling. We offer the packaging industry a variety of systems’ solutions, which incorporate our core products, such as Modular Linear, Worm Gear Ball Screw Jacks and Linear Slide Systems.
On display at the upcoming Pack Expo trade show, will be Nook’s pick and place, tri-bot, and other solutions to your packaging applications. Click here for your admission to Pack Expo, and visit Nook Industries at Booth E-7305 for your linear motion solutions.
With the use of our customized linear motion products, our packaging customers are able to increase and reach maximum productivity and product throughput. Contact Nook Industries, to see how we Make Motion Work for you!